basic introduction

The MIC department of Vietnam issued an announcement in early 2016 that from October 1 this year, all lithium batteries, including those sold independently and used in terminal products (notebooks, tablets, mobile phones, etc.), will require a DOC certificate (standard number: QCVN 101: 2006 / BTTTT). The above products will also be required to provide battery DoC when doing MIC certification in Vietnam.

On July 04, 2016, the MIC department considered that the product testing and certification cycle was too long, and the battery manufacturers did not have enough time to meet the certification requirements. They issued a notice again: postponed the implementation of the mandatory certification date for battery products to April 1, 2017 .

The following is the notice that Vietnam MIC postponed the implementation of the mandatory certification of battery products:

The Ministry of Information and Communications of the Socialist Republic of Vietnam (MIC) implements mandatory TCVN / TCN standard specifications for electromagnetic interference and communication products in the form of information products. The electromagnetic interference part can be applied by local suppliers by self-declaration, and finally approved by the Ministry of Information, the product can be sold on the Vietnamese market.

The IEC testing standards corresponding to the battery certification regulations QCVN 101: 2016 / BTTTT in Vietnam are IEC61960 (2011)   and IEC62133 (2012), [Note: These two standards must be met at the same time to meet the QCVN standard. 】

Documents to be submitted for MIC certification application

(1) Technical model specification table

(2) Quality declaration management system

(3) Control approval method of quality certificate or ISO9001 certificate

(4) Structural protection approval certificate

(5) Declared rated power

(6) Antenna report

(7) Test report

(8) (Block Diagram, Schematic Diagram, Bill of Material, Parts Placement, IC Data Sheets, Internal and External Photos, Product Deion, User manual, Operational / Technical Deion, Deion of Pheripherals / Accessories)

(9) Label information

(10) Power of attorney / authorization

The specific process of applying for MIC certification

(1) The manufacturer provides the product manual, the laboratory confirms the quotation, and both parties sign a cooperation contract.

(2) The application needs to submit materials: samples, product specifications, circuit diagrams, block diagrams, operation descriptions, BOMs, key component certificates, application forms and other materials.

(3) After collecting the information, the laboratory officially starts the certification project and arranges the test.

(4) After completion of the test, issue a test report and certificate.

(5) Normal test cycle: 2-3 weeks.

Our advantage

1. With a professional qualification and experienced expert technical team, we can provide you with professional consultation and services.

2. Have advanced laboratory equipment to ensure the accuracy and reliability of test data.

3. As a third-party testing and certification organization trusted by customers worldwide, we are your certificate of quality.